Search Results:
- A technician is searching through a storage locker and finds a PoE injector. What is the purpose of this device? It is a device that can be inserted in the middle of a cable run to add power. It connects the network of a user to the digital...
- It connects multiple end devices and can be configured for VLANs and port security. It provides a wired or wireless connection between end devices, switches, and routers and in some cases, can regenerate weak signals. It is placed between two or...
- It is a device that allows a network administrator to manage many remote networking devices from a central location. A technician is searching through a storage locker and finds a firewall. It transfers small amounts of DC current over Ethernet cables to power low voltage devices such as wireless access points and surveillance cameras.
CCNA 1 V5 Introduction To Networks Chapter 5 Exam Answers 2014
UTM TPM Explanation: A universal threat management UTM device is an all-in-one security device that can provide firewall, proxy filtering, email filtering, and network access control services as well as be a point where remote users connect to the company using a VPN. Which smart home wireless technology has an open standard that allows up to devices to be connected? Z-Wave uses the Which network device allows administrators to remotely manage many devices through one dashboard interface? Which internet connection type is an always-on service that uses radio signals sent from a tower to a receiver in a home or business?- All three protocols are application layer protocols. A client packet is received by a server. The packet has a destination port number of What service application is the client requesting? A technician is searching through a storage locker and finds a PoE injector. What is the purpose of this device? It is a device that can be inserted in the middle of a cable run to add power. It is a device that allows a network administrator to manage many remote networking devices from a central location. It connects the network of a user to the digital infrastructure of a phone company, providing always-on service. It connects a home or business network to a company that provides internet connectivity as well as television signals. A technician is searching through a storage locker and finds a managed switch. It connects multiple end devices and can be configured for VLANs and port security. It provides a wired or wireless connection between end devices, switches, and routers and in some cases, can regenerate weak signals.
- It is placed between two or more networks and protects data and equipment from unauthorized access. A technician is searching through a storage locker and finds a Powerline networking connector. It is a device that uses existing electrical wiring to connect devices and sends data using specific frequencies. It connects networks and forwards traffic to remote networks by using IP addressing information.
- A technician is searching through a storage locker and finds a cable modem. A technician is searching through a storage locker and finds an unmanaged switch. It is a device whose sole purpose is to connect end devices and to microsegment a LAN. A technician is searching through a storage locker and finds a DSL modem. A technician is searching through a storage locker and finds an access point. It uses radio waves to provide network access to wireless devices. A technician is searching through a storage locker and finds a router. A technician is searching through a storage locker and finds a cloud-based network controller. It transfers small amounts of DC current over Ethernet cables to power low voltage devices such as wireless access points and surveillance cameras.
[GET] It Essentials (version 6.00) - Ite Chapter 5 Exam Answers | Free!
Which technology is most often used to connect devices to a PAN? Bluetooth network technology commonly provides the connectivity. A technician is searching through a storage locker and finds a firewall. Which device acts as a termination point for cable runs and keeps cables secure and safely out of walkways? Patch Panel.- The following are the questions quiz answers. Guarantee Passed. ITE v6. You can review all Chapter 5 Quiz Answers. Good Luck for ITE v6. What are two ways that network operating systems NOS differ from desktop operating systems? Choose two. Network operating systems enable files and folders to be shared on a network, whereas desktop operating systems can not share files or folders. Network operating systems have limited account user management capabilities, but desktop operating systems can manage many user accounts. Network operating systems can support many users at the same time, but desktop operating systems can only support a limited number of users at a time. Network operating systems have strong security and account management capability, but desktop operating systems have limited security and account management capability.
- Network operating systems support a single user, but desktop operating systems can support many users. Explanation: Network operating systems, sometimes called server operating systems, are designed to support many users who connect to a server over a network. Many network users can access storage and printer resources and can run multiuser applications at the same time. Desktop operating systems can support a limited number of users who access shared resources. However, security and user management functionality is limited. So while desktop operating systems have limited network sharing capabilities, most businesses will require the use of a network operating system for serious business use. Which key, when pressed during the boot process, will allow the user to choose to start Windows in safe mode?
- Choose two. Network operating systems enable files and folders to be shared on a network, whereas desktop operating systems can not share files or folders. Network operating systems have limited account user management capabilities, but desktop operating systems can manage many user accounts. Network operating systems can support many users at the same time, but desktop operating systems can only support a limited number of users at a time.
- Network operating systems have strong security and account management capability, but desktop operating systems have limited security and account management capability. Network operating systems support a single user, but desktop operating systems can support many users. Explanation: Network operating systems, sometimes called server operating systems, are designed to support many users who connect to a server over a network. Many network users can access storage and printer resources and can run multiuser applications at the same time. Desktop operating systems can support a limited number of users who access shared resources. However, security and user management functionality is limited.
- So while desktop operating systems have limited network sharing capabilities, most businesses will require the use of a network operating system for serious business use. Which key, when pressed during the boot process, will allow the user to choose to start Windows in safe mode?
- FTP manages file transfers. SMTP sends email. ICMP is a messaging protocol that is used in troubleshooting. What security technique could provide secure access to a server located in a small office without the expense of implementing a DMZ or purchasing a hardware firewall? This method provides access to devices across the Internet in a less expensive way than using a DMZ. A group of users is unable to connect to the network. When testing several of the PCs and issuing the command ipconfig, the technician notices that all of them have an IP address in the What is the most likely cause of this problem? The Internet connection is down. The DHCP server is not operational. The gateway address is incorrect. The DNS server is not operational. What is the correct compressed format of the IPv6 address db8:eeffa?
- Rule 1: leading zeros in any hextet can be removed. Rule 2: contiguous hextets of all zeros can be compressed to a double colon. Rule two can only be applied once. What is the proper CIDR prefix notation for a subnet mask of A technician is configuring the channel on a wireless router to either 1, 6, or What is the purpose of adjusting the channel? A channel frequency can interfere with channels on either side of the main frequency. All wireless devices need to be used on nonadjacent channels. Which network server is malfunctioning if a user can ping the IP address of a web server but cannot ping the web server host name? Multiple users report that the workstations are assigned a The users are able to communicate only between each other.
ITE V - IT Essentials Chapter 5 Quiz Answers - CCNA 7 Exam Answers
What is a possible solution? Restart the DNS server. Statically configure a default gateway on each workstation. Verify the network cable on all user machines. Restart the DHCP server. Explanation: When a network device automatically obtains the IP address The DHCP server should be restarted to ensure that it is operational. An administrator deploys wireless access points across the office to provide wireless network connectivity to users. After a file server with a static IP is connected to the wired network, the administrator receives an IP address conflict message. Change the static IP configured on the file server. Connect the file server to the wireless network.IT Essentials (ITE V5.0 & V5.02) Chapter 5 Exam Answers 100% 2021
Explanation: If an IP address conflict message is displayed, then a single IP address is being used more than once on the same network. To solve this issue, the administrator needs to give a different static IP address to the server on the network. A workstation has been moved from the first floor to the fifth floor within an organization. The user is now reporting that the workstation cannot connect to the network. What is a possible cause of the problem? An IP address conflict occurred. The DHCP server is misconfigured. The workstation has been configured with a static IP address. The default gateway address is misconfigured on the workstation. Explanation: In most cases in an organization, when a computer is moved from one department to another, it needs a new IP address to connect to the network. Which is the host identifier of the device?- Thus the first 64 bits represent the network portion, whereas the last 64 bits represent the host portion of the IPv6 address.
- Windows Easy Transfer 9. What is critical to consider when determining the version of Windows to install on a desktop computer? A user downloads and uses the Windows 7 Upgrade Advisor to generate a report on a PC that is being considered for an operating system upgrade. What information would the report contain?
Cisco chapter 5 exam answers - ZoneAlarm Results
What are two features of the active partition of a hard drive that is using MBR? Choose two. The active partition must be a primary partition. An active partition must be assigned C: as the drive letter. The operating system uses the active partition to boot the system. A computer with the Windows 7 operating system fails to boot when the system is powered on. The technician suspects that the operating system has been attacked by a virus that rendered the system inoperable. What measure could be taken to restore system functionality? Use a differential backup to restore the system.- Use an incremental backup to restore the system. Use a system image that was created prior to the failure to restore the system. What is the purpose of a recovery partition? What Windows 8 tool allows the computer to be rolled back to its factory state without losing any user files?
- Windows 8 Explanation: Windows 8 introduced the Metro user interface. The Windows 8. Where can a technician look to determine if specific computer hardware or software has been tested to work with Windows 7? Microsoft Compatibility Center Windows 7 manual Windows Easy Transfer What is critical to consider when determining the version of Windows to install on a desktop computer?
- The report generated by the Upgrade Advisor utility not only points out the incompatibilities but also proposes possible resolutions to the problems identified. A user downloads and uses the Windows 7 Upgrade Advisor to generate a report on a PC that is being considered for an operating system upgrade. What information would the report contain? What are two features of the active partition of a hard drive that is using MBR? Choose two. The active partition must be a primary partition. Up to four primary partitions can be marked as active. An active partition must be assigned C: as the drive letter.
- The operating system uses the active partition to boot the system. The active partition may include the manufacturer recovery partition. Explanation: Under the MBR partition scheme standard, up to four partitions can be primary partitions, but only one of them can be marked as active. Even though the C: drive is normally the active partition, a computer could have another drive letter partition marked as active. The recovery partition is never used in normal operations as an active partition, but is used when no other means is possible to recover the operating system to the original configuration. A computer with the Windows 7 operating system fails to boot when the system is powered on. The technician suspects that the operating system has been attacked by a virus that rendered the system inoperable.
- What measure could be taken to restore system functionality? Use a differential backup to restore the system. Use an incremental backup to restore the system. Use a system image that was created prior to the failure to restore the system. Run chkdsk on the affected drive to restore system files to their post-installation state. Explanation: The best way to restore an operating system that has been corrupted by a virus is to use a prior system image to conduct the restore. It is useful in troubleshooting errors caused by corruption of the physical disk surface and can also be used to check the integrity of various files and folders within the operating system. In order to use differential and incremental backups to restore the system you would also require the last full backup as well.
No comments:
Post a Comment